We know you want the best for your little one. At Fusion™, we want the same.
We at Fusion™ wanted to develop a paint that was TRULY zero VOC and non-toxic for you and your loved ones. Through years of development we have achieved this without sacrificing quality and durability. Fusion is a best-in-class paint that features an environmentally and health conscious formulation.
Babies and young children are more susceptible to the health risks associated with VOCs. Our Paint is lead free, phlalate free, formaldehyde free, ammonia free, virtually odourless and is Zero VOC.
Fusion™ cares about you and your wee ones. Our Tones for Tots™ collection complies with both the lead and phlalate restrictions of the Toy Safety Standards of North America and Europe, as well as the ASTM D4236 LHAMA safety labelling requirements.
1. CPSIA Act of 2008- Section 108 – Pthalates
2. ASTM D-4236 -Confirming that the products have been properly labeled, and there is no chronic health hazard, in accordance with the federal Labeling Hazardous Art Materials Act (LHAMA)
3. CPSIA Section 101 – Total Lead In Paints & Surface Coating
Fusion™ is unlike any other paint on the market!
Built in Topcoat ~ Price ~ Quality & Durability ~ Eco Friendly
We’ve done this for you! Fusion has taken us over 10 years to develop, test and refine, and our hard work has truly paid off. Fusion’s results are nothing less than spectacular, providing furniture painters a best-in-class paint that features; an environmentally conscious formulation, zero VOCs, superior durability, easy one-step application and significantly improved strength. Delivering an exceptional matte finish, this 100% acrylic paint requires minimal prep work!
Application: Follow our directions carefully and Fusion can be applied to most previously painted or coated surfaces without priming or significant prep work.
No top coat?: Fusion is formulated with a built in top coat, the 100% acrylic resin. You do not need to use a top coat for water permanency!
Tip: On a microscopic level, flat or matte finishes have tiny ridges and valleys when the paint dries. Therefore, fingerprints and marking can occur. The marks can easily be removed using a damp cloth, however, if you are concerned about dust marks, apply a coat of FUSION Beeswax Finish or FUSION Tough Coat.
Coverage: Excellent coverage! Our Fusion paint offers incredible coverage of 75 sq ft per Pint(500ml). In most cases one coat is all you need. Our coverage is outstanding!
Durability: Once Fusion has cured, it yields a highly durable and a washable finish. If you choose, you can of course achieve a beautiful lustre by adding a Beeswax Finish on top, or the Tough Coat. Fusion is dry to the touch after 2 hours and can accept a recoat after 4 hours. Cure time with all acrylic paints is 21 days, however, painted surfaces can be used gently after 24 to 48 hours of drying time.
Sheen: Fusion is offered in a gorgeous matte finish. This means an almost zero reflectance value that allows you to achieve a beautiful smooth finish.
Distress: Absolutely! This paint is extremely easy to work with, though we recommend distressing soon after the paint has dried. It is very durable, so achieving the same result is tad more work after it has cured! It is recommended to apply a top coat when you distress because you will break open the surface and a top coat will be necessary to prevent water damage and continued distressing through extensive wear and tear.
How much paint do I need for my projects?
Fusion™ has an excellent coverage, which allows us to offer Fusion™ in Pints and tester sizes. A Pint covers approximately 75 sq ft (7m²).
Most projects only require a Pint. Fusion Mineral Paint are offers excellent quality and coverage, in sizes you will use, resulting in less environmental waste.
Visit Fusion Mineral Paint at www.fusionmineralpaint.com for more great tips and techniques!