Perfect for those high traffic surfaces such as table tops, kitchen cabinets, and dresser drawers. Our non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth and dries to a matte finish. Roll bottle upside in your hand for about a minute before use to allow matting agent to mix well. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.
Good to know: 500ml covers about 75 sq.ft (7m2). Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.
Tip: Be sure to gently mix your Tough Coat™ prior to using it as the matting agent and other ingredients may settle to the bottom. Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied. BEFORE USING FLIP BOTTLE UPSIDE DOWN FOR A FEW MINUTES TO ALLOW MATTING AGENT TO BEGIN TO MIX. AFTER ABOUT 2 MINUTES ROLL TOUGH COAT GENTLY AROUND IN BOTTLE FOR ANOTHER MINUTE. NOW YOU ARE READY TO APPLY. If you notice matting agent beginning to separate in bottle while you are still sealing your project. Be sure to gently roll Tough Coat around in bottle again to keep Matting agent mixed well.
Learn more about the benefits of Tough Coat™ on https://fusionmineralpaint.com/tough-luck/
Visit Fusion Mineral Paint at www.fusionmineralpaint.com for more great tips and techniques!