When you see a white roller cover with diagonal blue stripes, it’s microfiber. They are best used on light to medium textured surfaces. For very smooth surfaces, use a white woven short nap roller. It will provide you with an ultra fine finish.
Don’t use excessive pressure to apply paint—an even, light pressure is all that is needed.
If you need to stop in the middle of your project and are not finished painting. Seal your Roller and frame in a Gallon sized Ziploc bag. Remove as much air as possible and zip bag tight. If you can’t continue painting your project within 24 hours. I would suggest washing roller so it will be ready when you can continue.
Remove your roller cover from the roller frame right after you are finished painting. Use soap and water to clean up after using paint. Hold the roller cover under running water and squeeze your hand over the roller to remove the paint. Repeat until all the paint is out of the roller, then let dry. Never leave the cover soaking in water.
Visit Fusion Mineral Paint at www.fusionmineralpaint.com for more great tips and techniques!